Flat Edge and Bevel Processing Capabilities
The VertiEdge641 is optimized for practical edge-finishing applications rather than complex multi-profile production.
Flat Edge Polishing
The six-stage flat polishing system progressively grinds and polishes straight stone edges to achieve a smooth and consistent finished surface.
Straight Bevel Polishing
The dedicated bevel heads process angled edges continuously, making the machine suitable for standard bevel and chamfer requirements.
Flat Edge + Chamfer Finishing
The machine can combine straight-edge polishing with chamfer processing for applications where both edge surfaces need to be finished during the same production workflow.
Back Edge Processing
The integrated back-cutting unit provides additional processing capability for selected countertop and architectural stone applications.
Materials Suitable for the VertiEdge641
The Stone Edge Polishing Machine can be configured for processing a variety of natural and engineered materials, including:
- Granite
- Marble
- Quartz
- Engineered stone
- Ceramic materials
- Other compatible stone and slab materials
Tool selection and processing parameters should be matched to the specific material and required finish.
Vertical Processing: A Better Fit for Space-Constrained Workshops
Unlike conventional horizontal edge-processing equipment, the VertiEdge641 processes material in an upright position.
This approach is particularly valuable for workshops where slabs are already handled vertically. It can simplify the movement of material through the production line while reducing the amount of floor space dedicated to edge finishing.
The machine can be installed directly on the workshop floor, and its water discharge can be directed through a standard drainage connection.
VertiEdge641 vs. Conventional Edge Polishing
| Feature | VertiEdge641 | Conventional Horizontal System |
|---|---|---|
| Material Orientation | Vertical | Horizontal |
| Floor-Space Requirement | Compact | Generally larger |
| Material Handling | Vertical workflow | Requires horizontal positioning |
| Flat Edge Polishing | ✓ | ✓ |
| Bevel Polishing | ✓ | ✓ |
| Continuous Processing | ✓ | Model dependent |
| Back Cutting | ✓ | Model dependent |
| Suitable for Compact Workshops | ✓ | Depends on layout |
The VertiEdge641 is therefore particularly attractive to fabricators looking for a compact vertical edge polisher focused on high-demand flat-edge and bevel applications.
Frequently Asked Questions
What materials can the VertiEdge641 process?
It is designed for marble, granite, quartz, engineered stone, ceramic, and other compatible materials.
What thickness can the machine process?
The standard processing range is approximately 10–60 mm, depending on the selected configuration and tooling.
What edge profiles does the VertiEdge641 produce?
The machine is primarily designed for flat polished edges, straight bevels, and chamfers. Additional functions may be available depending on configuration.
Does the machine process slabs horizontally?
No. The VertiEdge641 uses a vertical processing configuration, allowing stone pieces to remain upright during edge finishing.
Can the machine be customized?
Yes. HORD can adjust the machine configuration, electrical specifications, tooling, and selected functions according to the customer’s material and production requirements.
Complete Your Stone Edge Processing Line
If your production mainly involves flat polished edges, straight bevels, and chamfers, the VertiEdge641 provides a focused and space-efficient solution without adding unnecessary processing functions.
HORD Machinery can recommend the appropriate tooling, configuration, electrical specification, and production setup based on your stone material, thickness, edge requirements, and expected production volume.
